TY - JOUR
JF - JCPP
JO -
VL - 10
IS - 3
PY - 2006
Y1 - 2006/10/01
TI - Investigation of Rectangular and U-Shaped Labyrinth Weirs
TT - بررسی سرریزهای چند وجهی با پلان مستطیلی و U شکل
N2 - Because of slight variation of the static head due to discharge fluctuations, the labyrinth weirs are considered to be economical structures for flood control and water level regulation in irrigation networks, as compared to other devices. Labyrinth weirs are composed of folded sections observed as trapezoidal and triangular in plan view. In this study, rectangular and U-shaped labyrinth weirs were investigated. Experiments were conducted on 15 labyrinth weir models. The models included eight rectangular labyrinth models and six U-shaped labyrinth models with different heights and lengths, and one linear model. All the experiments were performed in a horizontal rectangular flume, 7 m long, 0.32 m wide and 0.35 m high. The results indicated that for all the models, discharge coefficient increased sharply with an increase in Ht/P and attained a maximum value. This coefficient then decreased smoothly with a further increase in Ht/P. Increasing height of weirs increased the discharge coefficient for both rectangular and U-shaped weirs. The results also showed that increasing the length parallel to the flow direction decreased and increasing the length perpendicular to the flow direction increased the discharge coefficient. Generally, the discharge coefficient for rectangular weir was less than that of the U-shaped weir. The obtained results compared with those of Tullis et al. (1995) showed that discharge coefficient for U-shaped weir is more and for rectangular weir is less than that of the trapezoidal weir for angle of the side legs of 8 and 12 degrees.
SP - 1
EP - 12
AU - M. Heidarour,
AU - S. F. Mousavi,
AU - A. R. Roushani Zarmehri,
AD -
KW - Labyrinth weir
KW - Linear weir
KW - Coefficient of discharge
KW - Laboratory model
UR - http://jcpp.iut.ac.ir/article-1-562-en.html
ER -