Journal of Crop Production and Processing
نشریه تولید و فرآوری محصولات زراعی و باغی
Isfahan University of Technology - Journal of Crop Production and Processing
http://jcpp.iut.ac.ir
1
admin
2251-8517
2251-8525
fa
jalali
1387
10
1
gregorian
2009
1
1
12
46
online
1
fulltext
fa
بررسی دو روش فتوگرامتری و زبری سنج لیزری به منظور اندازهگیری میکروتوپوگرافی خاک
A Study of Soil Microtopography Using Photogrammetry and Laser-Scaning Methods
عمومى
General
پژوهشي
Research
اساس کار ارائه شده بر مبنای تهیه یک مدل رقومی زمین (DEM) در دو ماکت با ابعاد 50×50 سانتی متر و با شرایط زبری متفاوت (زبری تند و زبری ملایم) میباشد. برای تهیه DEM از دو روش زبریسنج لیزری و فتوگرامتری استفاده شد. تصاویر فتوگرامتری در دو تکرار و در تاریخهای متفاوت بهدست آمد. روش لیزری با داشتن صحت و دقت بسیار بالا به عنوان روش شاهد به منظور ارزیابی روش فتوگرامتری در نظر گرفته شد و سپس این دو روش با استفاده از پارامترهای مختلف آماری و خصوصیات خاک مانند هیستوگرامهای شیب و ارتفاع مورد مقایسه قرار گرفتند. در نهایت با استفاده از مدلهای رقومی زمین دو روش میزان ضریب زبری تصادفی (RR) و حداکثر نگهداشت سطحی خاک تعیین شد. RR عنوان نماینده میکروتوپوگرافی سطح خاک و یکی از عوامل کلیدی در بسیاری از فرآیندهای هیدرولیکی و فرسایش مورد مطالعه قرار گرفت. میزان خطای RR محاسبه شده به وسیله روش فتوگرامتری در مقایسه با لیزری به طور متوسط 10 درصد در ماکت با زبری پایین و 5 درصد در ماکت با زبری بالا میباشد. این میزان خطا در محاسبه حداکثر نگهداشت سطحی (MDS) بین 2 تا 34 درصد یعنی حداکثر حدود 17/0 میلیمتر تغییر میکند. در این تحقیق روش، فتوگرامتری مدل رقومی با شیب ملایمتری برای ماکت با زبری بالا در مقابل لیزری (یعنی به طور متوسط حدود 5/40 در برابر 46 درجه برای لیزری) و شیب تندتری برای ماکت با زبری پایین (متوسط5/23 در مقابل 7/20 برای لیزری) ارائه داده است. نتایج این تحقبق نشان میدهد که روش فتوگرامتری روشی مناسب برای تخمینی با دقت کافی از میزان RR و تخمین مناسبی از میزان MDS میباشد.
At present, soil surface characteristics (SSC) are recognised as key parameters controlling infiltration rates, runoff generation and erosion. Microtopography of surface among SSC is the main one. The work presented in this paper is based on a set of digital elevation models (DEMs) supplied by two different methods: Laser roughness-meter and photogrammetry method. We used two maquettes. The used maquettes correspond to varying roughness (rough and soft roughness). These methods were compared using different statistical parameters of SSC such as heights and slopes histograms. In addition, we studied estimation of Random Roughness (RR) coefficient and Maximum Depression Storage (MDS). RR is considered as an indicator of microtopography and it is one of the main parameters influencing erosion and runoff-infiltration processes. The obtained RR by photogrammetry method showed, on average, 10 percent difference from laser method for soft maquette and 5 percent for the rough maquette. The range of this difference for the MDS varies from 2 to 34 percent, i.e., maximum 0.17 millimetres. In this study, photogrammetric method gives the DEMs with a lower slope for the rough maquette (on average 40.5 versus 46 for the laser method) and higher slope for the soft maquette (about 23.5 versus 20.7 for the laser method). The results showed the DEMs provided by photogrammetric method is able to perform accurate estimation for RR and provides good estimation for the MDS. Therefore, it can be useful in erosion and hydraulic studies.
: فتوگرامتری، زبریسنج لیزری، زبری تصادفی، مدل رقومی زمین
Photogrammetry, Laser roughness-meter, Random roughness, Digital elevation model, Maximum depression storage.
737
756
http://jcpp.iut.ac.ir/browse.php?a_code=A-10-576-1&slc_lang=fa&sid=1
M
Mirzaee
محمدرضا
میرزایی
10031947532846009834
10031947532846009834
Yes
S
Ruy
استفان
قوی
100319475328460010131
100319475328460010131
No
GH
Ghazavi
غلامرضا
قضاوی
100319475328460010132
100319475328460010132
No
C
Bogner
کریستینا
بونر
100319475328460010133
100319475328460010133
No