OTHERS_CITABLE اثر تاریخ کاشت بر تحمل به تنش سرما در ژنوتیپ‌های گندم با تیپ رشد پاییزه، بهاره و بینابین   سرمازدگی‌های زودرس پاییزه و دیررس بهاره اغلب خسارت‌هایی را به تولید گندم شمال غرب ایران تحمیل می‌کنند. برای بررسی تحمل به تنش سرما در ﮊنوتیپ‌های گندم، آزمایشی تحت شرایط گلخانه در قالب طرح کامل تصادفی و مزرعه‌ای با طرح بلوک‌های کامل تصادفی در سه تاریخ کاشت 20 مهر و 10 و 30 آبان ماه در سال زراعی 87-1386 در ایستگاه تحقیقات کشاورزی ساعتلوی ارومیه روی 15 ژنوتیپ گندم با سه تیپ رشد پاییزه، بینابین و بهاره انجام گرفت. نتایج نشان داد که بیشترین و کمترین میزان نشت یونی به‌ترتیب مربوط به ژنوتیپ‌های با تیپ رشد بهاره و بینابین بود. در مرحله شش برگی (60 روز پس از کاشت)، ژنوتیپ‌های با تیپ پاییزه شامل سایسون، مارتن، گاسکوﮊن، C-82-12 ، C-81-14 ، به همراه الوند، مهدوی و زرین با تیپ رشد بینابین در مرحله رشد رویشی بوده ولی ژنوتیپ‌های بهاره به اسامی شیراز، پیشتاز، M-79-7 ، M-81-13 و کویر با دو ژنوتیپ بینابین مرودشت و طوس وارد فاز زایشی و حساس به سرما شدند. ژنوتیپ‌های با تیپ بهاره از حداقل عملکرد دانه و اجزای آن نسبت به سایر تیپ‌های رشد برخوردار بودند. ژنوتیپ‌های با تیپ رشد بینابین، ماده خشک کل بیشتر و ارتفاع زیادتری داشتند. ژنوتیپ C-82-12 از نشت یونی کم و حداقل دمای لازم برای زنده ماندن 50% بوته‌ها با 35- درجه سلسیوس از میانگین عملکرد دانه و ماده خشک بالایی برخوردار بود. در مقابل، ژنوتیپ M-79-7 بیشترین نشت یونی، دامنه تغییرات و انحراف معیار برای صفات عملکرد دانه و ماده خشک را در سه تاریخ کاشت داشت و حداقل دمای لازم برای زنده ماندن 50% بوته‌ها 30- درجه سلسیوس بود. در بین اجزای عملکرد، صفت تعداد سنبله در متر‌مربع همبستگی مثبت معنی‌داری با عملکرد دانه داشت. به‌طور کلی، داشتن همبستگی منفی معنی‌دار بین نشت یونی با ماده خشک کل و عملکرد دانه می‌تواند به عنوان معیار غیر‌مستقیمی برای غربال ژنوتیپ‌های گندم متحمل به تنش سرما به کار برده شود. http://jcpp.iut.ac.ir/article-1-1382-fa.pdf 2011-05-15 1 18 تنش سرما، عملکرد دانه، نشت یونی، تیپ رشد Effect of Planting Date on Cold Tolerance of Winter, Spring and Facultative Growth Types of Wheat Genotypes Early autumnal and late spring frosts usually impose damages to wheat production in North-West of Iran. In order to investigate cold tolerance of wheat genotypes, two laboratory and field experiments were carried out at three planting dates of 12 Oct. and 1 and 21 Nov. 2007 in Saatlu Agricultural Research Station on 15 genotypes with winter, facultative and spring-growth types. Arrangement of the greenhouse and field experiments were completely randomized design and randomized complete blocks design, respectively. Results showed that spring and facultative- growth types had the highest and lowest ion leakage. At 6-leaf stage (60 days after planting), autumn-growth type genotypes including Saison, Marton, Gascogen, C-82-12, C-81-14, along with facultative-growth type genotypes of Alvand, Mahdavi and Zarrin were in vegetative growth stage, but Shiraz, Pishtaz, M-79-7, M-81-13 and Kavir spring-growth type genotypes, with two facultative-growth type genotypes of Marvdasht and Tus entered the reproductive stage and were susceptible to cold stress. Spring-growth type genotypes had the minimum grain yield and yield components. Facultative-growth type genotypes had more total dry matter and were taller. The C-82-12 genotype had minimum ion leakage, needed minimum survival temperature of -35 ْC for 50% of the plants, and had maximum grain yield and total dry matter. In contrast, the M-79-7 genotype had maximum ion leakage, highest standard deviation for grain yield and dry matter, and needed minimum survival temperature of -30 ْC for 50% of the plants. Number of spike per m2 had positive correlation with grain yield. In general, negative correlation of ion leakage with total dry matter and grain yield could be used as an indirect criterion for screening of cold tolerant wheat genotypes. http://jcpp.iut.ac.ir/article-1-1382-en.pdf 2011-05-15 1 18 Cold stress Grain yield Ion leakage Growth type. A. Eivazi alirezaeivazi@yahoo.com 1 AUTHOR M. Javani 2 AUTHOR M. Rezaei 3 AUTHOR
OTHERS_CITABLE بررسی خصوصیات کمی و کیفی چهار رقم سویا (Glycine max L.) تحت تاریخ‌های مختلف کاشت در منطقه شهرکرد   به منظور بررسی تأثیر تاریخ کاشت بر صفات کمی و کیفی سویا، آزمایشی در مزرعه تحقیقاتی مرکز تحقیقات کشاورزی و منابع طبیعی استان چهارمحال و بختیاری به صورت کرت‌های یک‌بار خرد شده در قالب طرح بلوک‌های کامل تصادفی در چهار تکرار در سال 1387 اجرا گردید. کرت‌های اصلی به تاریخ‌های کاشت 15 اردیبهشت، 30 اردیبهشت، 14 خرداد و 29 خرداد و کرت‌های فرعی به چهار رقم سویا شامل M9 ، M7 ، L17 و ویلیامز اختصاص یافت. نتایج نشان داد که بیشترین تعداد غلاف در بوته، تعداد دانه در بوته و عملکرد بیولوژیک مربوط به رقم M9 در تاریخ کاشت 30 اردیبهشت بود. هم‌چنین این تاریخ کاشت، بیشترین وزن هزار دانه، درصد روغن و عملکرد بیولوژیک را دارا بود. تاریخ‌های کاشت 14 خرداد و 29 خرداد (به ترتیب با 6/37% و 4/38%) بیشترین میزان پروتئین را داشتند. بین کلیه‌ ارقام از نظر میزان روغن و پروتئین تفاوت معنی‌داری وجود نداشت. بین سه تاریخ کاشت 15 اردیبهشت، 30 اردیبهشت و 14 خرداد از نظر عملکرد دانه تفاوت معنی‌داری دیده نشد؛ ولی کمترین عملکرد دانه مربوط به 29 خرداد بود. به طور کلی، رقم M9 با عملکرد 1/2896 کیلوگرم در هکتار و در مرحله بعد رقم M7 با عملکرد 7/2597 کیلوگرم در هکتار مناسب‌ترین ارقام سویا برای کشت در منطقه شهرکرد قابل توصیه هستند. http://jcpp.iut.ac.ir/article-1-1383-fa.pdf 2011-05-15 19 33 سویا، عملکرد، اجزای عملکرد، پروتئین، روغن Study of the Quantitative and Qualitative Traits of Four Soybean (Glycine max L.) Cultivars under Different Sowing Dates in Shahrekord Region To study the effect of sowing date on quantitave and qualitative traits of soybean in Shahrekord region, an experiment was performed as split plot based on randomized complete blocks design with four replications at Agricultural and Natural Resources Research Centre of Chaharmahal-va-Bakhtiari, Shahrekord, in 2008. Four sowing dates (May 5, May 20, June 4 and June 19) and four varieties (M9, M7, L17 and Williams) were selected as main and sub plots, respectively. Results showed that maximum number of pods per plant, seeds per plant and biological yield were observed for M9 cultivar at 20 May sowing date. This sowing date had also the highest seed weight, oil percent and biological yield comared to other dates. The maximum protein percent was observed in June 4 (37.6%) and June 19 (38.4%) sowing dates. There was no significant difference between cultivars for oil and protein percent. There was no significant difference between three planting dates of May 5, May 20 and June 4 for seed yield. But minimum seed yield belonged to June 19 sowing date. In general, the M9 cultivar, with 2896.1 kg/ha seed yield, and then M7 cultivar with 2597.7 kg/ha seed yield, are recommendable as suitable soybean cultivars for cultivation in Shahrekord region. http://jcpp.iut.ac.ir/article-1-1383-en.pdf 2011-05-15 19 33 Soybean Yield Yield components Protein Oil. H. Gharakhani Beni 1 AUTHOR M. Movahhedi Dehnavi movahhedi54@yahoo.com 2 AUTHOR A. Yadavi 3 AUTHOR S. M. Hashemi Jazi 4 AUTHOR
OTHERS_CITABLE تأثیر زمان کاربرد پتاسیم بر عملکرد و محتوای پروتئین ‌دانه ارزن دم‌روباهی در ‌رژیم‌های متفاوت آبیاری   بررسی امکان کاهش مصرف آب در کشت‌های رایج مناطق مختلف از اولویت‌های مهم تحقیقاتی به منظور افزایش کارآیی مصرف آب در بخش کشاورزی می‌باشد . به منظور بررسی تأثیر زمان مصرف کود پتاسیم و دور آبیاری بر عملکرد دانه و میزان جذب نیتروژن در ارزن دم‌روباهی، آزمایشی در سال زراعی 1388 در مرکز تحقیقات کشاورزی و منابع طبیعی یاسوج، به صورت کرت‌های خرد‌شده در قالب طرح بلوک‌های کامل تصادفی با 3 تکرار انجام شد. دور آبیاری شامل فواصل آبیاری 7، 14 و21 روز در کرت‌های اصلی و زمان کاربرد کود پتاسم در مراحل کاشت، پنجه‌زنی، ساقه‌دهی و گل‌دهی در کرت‌های فرعی در نظر گرفته شدند. نتایج نشان داد که تأثیر دور آبیاری بر وزن هزار دانه، عملکرد دانه و بیولوژیک، تعداد دانه در خوشه، شاخص برداشت، میزان پروتئین دانه و محتوای کلروفیل a ، b و کل برگ معنی‌دار بود. با افزایش فواصل آبیاری، مقادیر مربوط به صفات مورد بررسی کاهش، ولی درصد پروتئین دانه افزایش یافت. وزن هزار دانه، عملکرد دانه و بیولوژیک، شاخص برداشت و میزان پروتئین تحت تأثیر زمان کاربرد کود پتاسیم معنی‌دار شد. بیشترین عملکرد دانه از برهمکنش تیمار فاصله آبیاری 7 روز با کاربرد پتاسیم در مرحله ساقه‌دهی حاصل شد. بیشترین میزان پروتئین دانه به تیمار کاربرد پتاسیم در مرحله گل‌دهی تعلق داشت. به طور کلی، با افزایش فواصل آبیاری و ایجاد تنش خشکی ناشی از آن، میزان رشد و اجزای عملکرد به شدت کاهش یافت. کاربرد کود پتاسیم در مراحل اولیه رشد تأثیر معنی‌دار افزایشی بر عملکرد و اجزای آن داشت، در حالی که در مراحل زایشی سبب افزایش کیفیت دانه گردید. http://jcpp.iut.ac.ir/article-1-1384-fa.pdf 2011-05-15 35 44 کلروفیل برگ، گل‌دهی، عملکرد بیولوژیک، فواصل آبیاری Effect of Timing of Potassium Application on Millet (Setaria italica) Yield and Grain Protein Content in Different Irrigation Regimes The research on reducing the water consumption in conventional cropping system is one of the important strategies to improve the water use efficiency in agriculture. In order to investigate the effect of time of potassium application under different irrigation regimes on millet grain yield and protein percent, a field experiment was carried out in Agricultural Research Center of Yasuj, Iran, in 2009. The experiment was conducted as split plot design in a randomized complete blocks design with 3 replications. Irrigation regime included 7, 14 and 21-day intervals as main factor and sub-plots included time of potassium fertilizer application in four stages: planting, tillering, stem development and flowering. The results showed that the effect of irrigation interval was significant on 1000-seed weight, grain and biological yield, number of grains per spike, harvest index, protein content, and chlorophyll a, b and total of leaves. By increasing the irrigation interval, all the above-mentioned traits decreased, except the protein percent that increased. The 1000-seed weight, grain and biological yield, harvest index and protein content were affected significantly by the time of potassium application. Maximum grain yield was obtained by interaction of 7- day irrigation interval and potassium application at the stem development stage. Maximum grain protein content was measured in potassium application at flowering stage. In general, increasing the irrigation interval, and subsequent water stress, reduced plant growth and yield components. Application of potassium fertilizer at early growth stages increased yield and yield components, while in reproductive stages increased seed quality. http://jcpp.iut.ac.ir/article-1-1384-en.pdf 2011-05-15 35 44 Leaf chlorophyll Flowering Biological yield Irrigation intervals A. Hayati 1 AUTHOR M. Ramroudi m_ramroudi@yahoo.com 2 AUTHOR M. Galavi 3 AUTHOR
OTHERS_CITABLE برآورد پارامترهای ژنتیکی صفات مرتبط با تحمل به شوری در گیاهچه‌های برنج به روش لاین × تستر   برنج دومین غله مهم کشور می‌باشد و بهبود صفات اقتصادی آن همواره از جایگاه ویژه‌ای برخوردار است. در تحقیق حاضر، به منظور برآورد پارامترهای ژنتیکی و شناسایی لاین‌هایی که هیبریدهای آنها در مرحله گیاهچه‌ای متحمل به تنش شوری باشند، هفت رقم مادری (شاه‌پسند، غریب، طارم محلی، اهلمی‌طارم، هاشمی، عنبر بو و دم‌سفید) و چهار رقم پدری (خزر، سپیدرود، درفک و آی‌ آر28) برنج در قالب تجزیه ژنتیکی لاین × تستر تلاقی داده شدند و نتاج حاصل در آزمایشگاه فیزیولوژی دانشگاه گنبد کاووس از لحاظ صفات مرتبط با تنش شوری مورد بررسی قرار گرفتند. این صفات شامل کد ژنتیکی، محتوای کلروفیل، طول ریشه و اندام هوایی، وزن تر و خشک ریشه و اندام هوایی، درصد سدیم و پتاسیم ریشه و اندام هوایی، نسبت سدیم به پتاسیم ریشه و اندام هوایی و درصد گیاهچه‌های زنده پس از اعمال تنش بودند. نتایج نشان داد که هر دو اثر افزایشی و غالبیت در کنترل صفات گیاهچه‌ای تحت شرایط شوری نقش دارند، اما آثار غیر افزایشی نسبت به آثار افزایشی نقش مهم‌تری را ایفا می‌کنند. در این مطالعه مشخص شد که ارقام هاشمی (101/0-)، غریب (284/0-)، طارم محلی (326/0-)، سپیدرود (562/0-) و درفک (164/0-) دارای قابلیت ترکیب‌پذیری عمومی خوبی برای انتقال صفت کد ژنوتیپی (عددی که نشان‌دهنده واکنش گیاه به شوری است) مطلوب‌تر و هم‌چنین درصد بوته‌های زنده بیشتر هستند و می‌توان از آنها در برنامه‌های اصلاحی برای کاهش کد ژنتیکی و افزایش درصد گیاهچه‌های زنده استفاده نمود. به‌علاوه، بررسی ترکیب‌پذیری خصوصی صفات مرفولوژیک و فیزیولوژیک نشان داد که از بین 28 تلاقی مورد ارزیابی، سه تلاقی سپیدرود×اهلمی‌طارم، درفک×هاشمی و درفک×سپیدرود می‌توانند برای برنامه‌های اصلاحی تحمل به شوری در مرحله گیاهچه‌ای مناسب باشند. http://jcpp.iut.ac.ir/article-1-1385-fa.pdf 2011-05-15 45 63 برنج، شوری، قابلیت ترکیب‌پذیری Investigation of Genetic Control of Traits Related to Salinity Tolerance in Rice Seedling Using Line × Tester Method After wheat, rice is the second most important cereal grown in Iran that improvement of its economical characteristics always has important role in the rice breeding programs. In order to estimate the genetic parameters and identify salt-tolerant varieties and hybrids in seedling stage, seven female parents (Shah-pasand, Gharib, Tarom Mahalli, Ahlami Tarom, Hashemi and Dom Sepid) and four male parents (Khazar, Sepidroud, Dorfak and IR28) were crossed in a Line × tester mating design and their progenies were evaluated for traits related to salinity tolerance in Physiology Laboratory of Gonbad Kavous University. These traits include genetic code, chlorophyll content, root and shoot length, dry weight of root and shoot, sodium and potassium percentage in roots and shoots, ratio of sodium to potassium in roots and shoots and the percentage of seedlings’ stand. The results showed both additive and non-additive effects are involved in seedlings’ traits under salinity condition but non-additive effects play more important role in the genetic control of the traits. In this study, it was found that varieties of Hashemi (-0.101), Gharib (-0.284), Tarom Mahalli (-0.326), Sepidroud (-0.562) and Dorfak (-0.164) which possess good general combining ability are suitable for transferring more desirable genetic code and the higher percentage of seedlings stand and could be used in breeding programs to reduce the genetic code and increase the seedlings’ stand under salinity stress. In addition, investigation of specific combining ability for morphological and physiological characteristics showed that among the 28 crosses, three hybrids of Sepidroud×Ahlami Tarom, Dorfak×Hashemi and Dorfak×Sepidroud could be suitable for the breeding programs of salinity tolerance in seedling stage. http://jcpp.iut.ac.ir/article-1-1385-en.pdf 2011-05-15 45 63 Cold stress Grain yield Ion leakage Growth type. H. Sabouri hos.sabouri@gmail.com 1 AUTHOR A. Sabouri 2 AUTHOR S. Navvabpour 3 AUTHOR
OTHERS_CITABLE پاسخ عملکرد دانه هیبریدهای ذرت به تنش خشکی در مراحل مختلف رشد تنش خشکی مهم‌ترین عامل محدود‌کننده رشد گیاهان زراعی از جمله ذرت، که بعد از گندم و برنج سومین غله مهم دنیا به شمار می‌رود، محسوب می‌شود. کمبود آب در مراحل مختلف رشد، آثار متفاوتی بر عملکرد دانه و اجزای عملکرد ذرت دارد. به منظور بررسی تغییرات عملکرد دانه و اجزای عملکرد چهار هیبرید ذرت در پاسخ به تنش خشکی در مراحل مختلف رشد، پژوهشی مزرعه‌ای به صورت آزمایش کرت‌های یک بار خرد شده بر پایه طرح بلوک‌های کامل تصادفی در چهار تکرار در دو سال زراعی 1388 و 1389 در ایستگاه تحقیقاتی دانشکده کشاورزی دانشگاه شیراز طراحی و اجرا شد. عامل اصلی مرحله اعمال تنش در چهار سطح: آبیاری مطلوب و قطع آبیاری در مراحل رشد رویشی (8 برگی تا پیش از گل‌دهی)، گل‌دهی و پر شدن دانه و عامل فرعی چهار هیبرید ذرت شامل: زولا، BC666، ماکسیما و SC704 بودند. تجزیه مرکب داده‌های دو سال نشان داد که تنش خشکی بر همه صفات بجز تعداد ردیف دانه در بلال اثر معنی‌داری داشت. تنش خشکی در مرحله رشد رویشی، ارتفاع بوته را به نحو معنی‌داری (2/10 درصد) کاهش داد. هم‌چنین تنش در مرحله گل‌دهی باعث کاهش 6/12 درصدی طول بلال، 8/17 درصدی تعداد دانه در بلال، 1/29 درصدی عملکرد دانه و 4/20 درصدی شاخص برداشت گردید. بیشترین کاهش در وزن هزار ‌دانه (3/10 درصد) نیز در تیمار تنش در مرحله پرشدن دانه به‌دست آمد. هیبرید SC704 دارای بیشترین ارتفاع بوته (07/ 281 سانتی‌متر)، طول بلال (45/19 سانتی‌متر)، تعداد دانه در بلال (62/710)، عملکرد بیولوژیک (25368 کیلوگرم در هکتار)، عملکرد دانه (11291 کیلوگرم در هکتار) و وزن هزار‌ دانه (49/316 گرم) بود. هیبرید ماکسیما بیشترین شاخص برداشت (99/46 درصد) را به خود اختصاص داد. بر‌اساس نتایج این پژوهش، حساس‌ترین مرحله زندگی ذرت به تنش خشکی، گل‌دهی بود. اگرچه تنش خشکی در همه مراحل رشد ذرت کاهش عملکرد دانه را به دنبال داشت، لیکن در شرایط کمبود آب می‌توان با پذیرش افت اندکی در عملکرد دانه، آبیاری در مرحله رویشی را حذف و به سایر گیاهان زراعی اختصاص داد. با توجه به نتایج این پژوهش می‌توان هیبرید SC704 را برای مناطق بدون محدودیت آب و هیبرید ماکسیما را برای شرایط دارای محدودیت آب توصیه کرد. http://jcpp.iut.ac.ir/article-1-1386-fa.pdf 2011-05-15 65 78 عملکرد بیولوژیک، هیبریدهای ذرت، مراحل رشد Yield Response of Maize Hybrids to Drought Stress at Different Growth Stages Drought stress is the most important limiting factor in crop plants including maize (Zea mays L.), which is the third important world crop after wheat and rice. Water deficiency at different growth stages affects maize yield differently. To examine the response of four maize hybrids to drought stress at different growth stages, a field experiment was carried out as a split plot based on completely randomized block design at Research Farm of College of Agriculture, Shiraz University, during 2009 and 2010 growing seasons. The main plots composed of four drought stress levels including optimum irrigation, withholding irrigation at vegetative growth stage (8-leaf to flowering), flowering and kernel filling. Four maize hybrids including Zola, BC666, Maxima and SC704 were allocated into sub-plots. Data analysis showed that the effect of year was not significant on measured characters thus, the data of both years were combined. Drought stress affected all measured characters except number of kernels per ear. The most significant effect of drought stress at vegetative growth phase was on reduction of plant height (10.2%). Drought stress at flowering reduced ear length (12.6%), kernel per ear (17.8%), yield (29.1%) and harvest index (20.4%). The 1000-kernel weight was significantly reduced (10.3%) when drought stress occurred at kernel filling stage. SC704 hybrid had the highest height (281.07 cm), kernel per ear (710.62), ear length (19.45 cm), 1000-kernel weight (316.49 gr), biological yield (25368 kg/ha) and kernel weight (11291 kg/ha). The highest harvest index (46.99%) was achieved in Maxima hybrid. It appears that flowering stage was the most sensitive stage to drought. Although drought stress at all growth stages reduced maize yield, but in dry areas, it might be possible to accept a small reduction in maize yield and save an irrigation in favor of other crops, simultaneously grown with maize. According to the results of this 2-year experiment, Maxima hybrid appeared to be suitable for drought-prone areas, while SC704 is better for normal conditions. http://jcpp.iut.ac.ir/article-1-1386-en.pdf 2011-05-15 65 78 Biological yield Maize hybrids Growth stages J. Rabbani 1 AUTHOR Y. Emam yaemam@gmail.com 2 AUTHOR
OTHERS_CITABLE تأثیر محلول‌پاشی عناصر ریزمغذی بر عملکرد دانه و ویژگی‌های کیفی سیاه‌دانه (Nigella sativa L.) در رژیم‌های مختلف آبیاری   به منظور ارزیابی تأثیر زمان آبیاری و محلول‌پاشی ریزمغذی‌ها بر عملکرد و ویژگی‌های کیفی دانه گیاه دارویی سیاه‌دانه، آزمایشی در سال زراعی 1388 در مرکز تحقیقات کشاورزی و منابع طبیعی بجنورد، به صورت کرت‌های خرد شده در قالب طرح بلوک‌های کامل تصادفی با سه تکرار انجام شد. در این آزمایش، دور آبیاری شامل فواصل آبیاری 7، 14 و 21 روز به عنوان عامل اصلی و محلول‌پاشی عناصر ریزمغذی شامل شاهد (عدم محلول‌پاشی)، روی، بر و آهن به ترتیب با غلظت 3، 2 و 4 در هزار و مخلوط سه عنصر به عنوان عامل فرعی انتخاب شدند. نتایج نشان داد که با افزایش زمان آبیاری وزن هزار دانه، عملکرد دانه و عملکرد اسانس دانه کاهش، ولی درصد اسانس دانه افزایش یافت. عملکرد دانه، وزن هزار دانه، درصد و عملکرد اسانس دانه، غلظت عناصر آهن، روی و بُر در دانه به طور معنی‌داری تحت تأثیر محلول‌پاشی عناصر ریزمغذی قرار گرفتند و غلظت عناصر مزبور در دانه در مقایسه با شاهد به طور معنی‌داری افزایش نشان داد. برهمکنش دور آبیاری و محلول‌پاشی بر درصد اسانس معنی‌دار بود. بیشترین عملکرد دانه از کاربرد محلول‌پاشی مخلوط عناصر ریزمغذی و فاصله آبیاری 7 روز به‌دست آمد. بیشترین درصد اسانس دانه از تیمار فاصله آبیاری 21 روز توأم با محلول‌پاشی مخلوط عناصر ریزمغذی حاصل شد. بنابراین چنین به نظر می‌رسد که محلول‌پاشی عناصر ریزمغذی همراه با دور مناسب آبیاری می‌تواند در افزایش عملکرد و ویژگی‌های کیفی دانه گیاه دارویی سیاه‌دانه مؤثر باشد. http://jcpp.iut.ac.ir/article-1-1387-fa.pdf 2011-05-15 79 89 عملکرد اسانس دانه، عناصر ریزمغذی، سیاه‌دانه Influence of Micronutrients Foliar Application on Seed Yield and Quality Traits of Black Cumin in Different Irrigation Regimes In order to investigate the effect of micronutrients foliar application and irrigation regimes on black cumin, a field experiment was carried out in Agricultural and Natural Resources Research Center of Bojnord, Iran, in 2009. The experiment was conducted as split plots in randomized complete blocks design with 3 replications. Irrigation regime included: 7, 14 and 21-day irrigation intervals as main factor and sub-plots included micronutrients foliar application in five treatments: No-foliar application (control), Zn foliar application with concentration of 3‰, B foliar application with concentration of 2‰, Fe foliar application with concentration of 4‰, and mixture of the three elements. Results showed that the effect of irrigation regime on 1000-seed weight, seed yield, and the percentage and yield of essential oils was significant. By increasing the irrigation interval, all of the above mentioned traits were decreased, except the essential oils percentage that was increased. Also, micronutrients foliar application affected seed yield, Fe, Zn and B concentration, and the percentage and yield of essential oils. Interaction between irrigation regime and micronutrients foliar application on percentage of essential oils showed significant effects. Maximum seed yield was obtained from 7-day irrigation regime and foliar application with a mixture of the three elements. Besides, maximum essential oils percentage was observed in interaction of 21-day irrigation regime and foliar application with a mixture of the three elements. Therefore, it appears that foliar application of micronutrients, along with proper irrigation interval, increases the seed yield and qualitative traits in black cumin. http://jcpp.iut.ac.ir/article-1-1387-en.pdf 2011-05-15 79 89 Yield of essential oil Micronutrients Black cumin SH. Shabanzadeh 1 AUTHOR M. Ramroudi m_ramroudi@yahoo.com 2 AUTHOR M. Galavi 3 AUTHOR
OTHERS_CITABLE اثر تراکم بوته بر عملکرد کمی و کیفی چهار ژنوتیپ آفتابگردان   برای ارزیابی تأثیر تراکم بوته بر عملکرد کمی و کیفی چهار ژنوتیپ آفتابگردان (Helianthus annuus L.) آزمایشی در سال 1388 به صورت فاکتوریل در قالب طرح بلوک‌های کامل تصادفی در چهار تکرار در مزرعه تحقیقاتی کبوترآباد اصفهان اجرا شد. تراکم بوته در چهار سطح 6، 8، 10 و 12 بوته در متر‌مربع و چهار ژنوتیپ آفتابگردان به ‌نام‌های Arm-mok18-85 ، S1R-85-ES ، MOK13-85 و KC20/83ES85 در نظر گرفته شد. نتایج نشان داد که اثر تراکم بوته بر تمامی صفات اندازه‌گیری شده به‌جز درصد روغن، نسبت مغز به پوست دانه، درصد پروتئین و تعداد روز تا رسیدگی فیزیولوژیک معنی‌دار بود. اثر ژنوتیپ بر همه صفات به‌جز قطر طبق، تعداد کل دانه در متر‌مربع، عملکرد روغن، درصد پروتئین و شاخص برداشت معنی‌دار بود. اثر برهمکنش تراکم بوته و ژنوتیپ بر عملکرد روغن، عملکرد بیولوژیک و تعداد روز تا رسیدگی فیزیولوژیک در سطح احتمال 1% معنی‌دار بود. بیشترین عملکرد دانه (52/3500 کیلوگرم در هکتار) از تراکم 12 بوته در متر‌مربع و ژنوتیپ Arm-mok18-85 به‌دست آمد. به طور کلی، نتایج نشان داد که بین تراکم‌های 10 و 12 بوته در متر‌مربع تفاوت معنی‌داری از نظر عملکرد دانه وجود نداشت. لذا به نظر می‌رسد به منظور کاهش مصرف بذر می‌توان تراکم 10 بوته در متر‌مربع را توصیه نمود. http://jcpp.iut.ac.ir/article-1-1388-fa.pdf 2013-02-23 91 103 ژنوتیپ آفتابگردان، صفات زراعی، عملکرد روغن، فاصله بوته Effect of Plant Density on Yield and Quality Traits of Four Sunflower Genotypes In order to determine the effect of plant density on yield and qualitative traits of four genotypes of sunflower (Helianthus annuus L.) an experiment was conduct in Research Farm of Kabotar Abad, Isfahan province, Iran, in 2009. The statistical design was factorial arrangement in complete randomized blocks with four replications. Four plant density (6, 8, 10 and 12 plants/m2) and four genotypes of sunflower (Arm-mok18-85, S1R-85-ES, MOK13-85 and KC20/83ES85) were considered. The results indicated that the effect of plant density was significant on all measured traits except oil percentage, ratio of nut to seed coat, protein percentage and number of days to physiological maturity. The effect of genotype was significant on all traits except head diameter, number of seeds per m2, oil yield, protein percentage and harvest index. Interaction of plant density and genotype was significant on oil yield, biologic yield and number of days to physiological maturity (p<0.01). The highest yield (3500.52 kg/ha) was produced in by plants/m2 and Arm-mok18-85 genotype. In general, results indicated that there was no significant difference for seed yield between 10 and 12 plants/m2 densities. Therefore, to decrease seed consumption, it seems that 10 plants/m2 could be recommended. http://jcpp.iut.ac.ir/article-1-1388-en.pdf 2013-02-23 91 103 Sunflower genotype Agronomic traits Oil yield Plant spacing. Z. Emami Bistgani zohreemami66@gmail.com 1 AUTHOR S. A. Siadat 2 AUTHOR A. Bakhshande 3 AUTHOR KH. Alami Saeid 4 AUTHOR GH. H. Shiresmaeili 5 AUTHOR