Volume 10, Issue 3 (fall 2006)                   JCPP 2006, 10(3): 165-174 | Back to browse issues page


XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

M. kasraei. Analysing Wear of Moldboard Plowshare Surface with Respect to the Distance Worked. JCPP. 2006; 10 (3) :165-174
URL: http://jcpp.iut.ac.ir/article-1-574-en.html

Abstract:   (5026 Views)
Wear is the most important problem of moldboard plowshares. Because of cutting the soil, intensity of wear at the front portion of share is large and the effect of its wear on plow performance is considerable. In this research wear of the front portion of moldboard plowshares with respect to distance worked was studied. Wear of cylindrical specimens which were attached to the front portion of plowshares of a semimounted four-bottom moldboard plow was determined in five equally distance interval. The soil was silty clay loam with 13-15% moisture content and the distance worked was 250 kilometers. Statistical analysis of the data indicated that there was no significant difference in the amount of wear of the four shares. In other words, they wore down simultaneously. The wear intensity of shares decreased with increasing distance worked i.e., the amount of weight reduction being highest during the initial period of operation. This may be attributed to “work hardening” due to severe plastic deformation during wear. Two mathematical models based on regression analysis were developed for predicting wear in the front portion of plowshare. The relationship of wear with respect to the distance worked can be expressed by an exponential function having a 0.75 exponent and the relationship of wear at the front edge of shares with respect to distance from point of share by a second order function with determination coefficient of 0.93 Nearly 75% of the total wear in the front edges occurred in the 1.3 length of shares from the tip.
Full-Text [PDF 854 kb]   (744 Downloads)    
Type of Study: Research | Subject: General

Add your comments about this article : Your username or Email:
Write the security code in the box

© 2015 All Rights Reserved | Isfahan University of Technology - Journal of Crop Production and Processing

Designed & Developed by : Yektaweb

تحت نظارت وف بومی آسپا-وف